#0035 No-Drip Spout - 1 Gallon Paint Can for Behr Paints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unlike Behr's spout design (which drips a lot) this one is a lot less messy.
- Ocena
- 4,8 / 5
- Polubienia
- 62
- Pobrania
- 620
- Wydruki
- 7
- Wyświetlenia
- 2992
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, please consider buying me a coffee, and check out my other models!
**********
Behr paints claims that their new spout that comes free with my paint purchase doesn't drip, but you can clearly see that their spout makes a bit of a mess in their own official video. Also, do you just leave the paint with an open spout and have the paint start to dry? Or try to remove the spout with all the wet paint still on it (so you can close the original lid to keep the paint from drying)?
It doesn't make sense, does it?
So I created a spout that I could use instead, along with a spout lid to keep the paint can covered temporarily. I also turned the metal handle of the paint can into a latch mechanism to keep the lid on! I was pretty happy to be able take advantage of that.
The spout itself is designed to direct the paint back into the can better once you are done pouring, and provides an easy to reach lip to wipe away the little paint that remains before you put the printed lid on, and latch closed with the metal handle (for the duration of your painting project.)
I've had mine on my paint can for about a month now (just to test it out) with no noticeable drying!
Use PLA - it's perfect for this application.
PLEASE NOTE: the spout is not intended to remain on for long-term storage (it doesn't have an air-tight seal) so please take it off after your project, wash and store it, and put the original lid back on for long-term storage. If you don't do this, you can only blame yourself! ;-P
It's not a screw-on spout, but a snap-on one instead.
Why did I do this?
- The Home Depot (where Behr paints are sold) near my house ran out of these [free] spouts and I got tired of waiting for them to become available. So I googled what this spout looked like and saw that the design wasn't that great.
- I wanted a spout that controls the drips better.
- Saves a lot of clean up time for multi-day projects.
- Reduces paint wastage.
- Makes clean-up much less messy.
Notes on usage:
- Tilt the paint can up SLOWLY after you are done pouring to minimize any chance of drips.
- With a gloved hand, wipe away the little paint that remains at the spout lip to put the spout lid back on.
- Swing the built in handle up to latch the spout lid securely - this can help save your paint on a long project, and saves you a lot of clean up time.
If you download this model and/or add it to your collection, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!