#0031 [Remix] F-15e Strike Eagle Kit Card (no sprue)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added snap features to hold the pieces together securely.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 248
- Wydruki
- 1
- Wyświetlenia
- 1012
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really enjoyed @PhabulusPhantom's kit cards for my kids and wanted to add some improvements to this F-15e model to help it fit together better (and stay together as they play with it). I added tab and notch features to the mating parts so they “snap” together.
I tried it in the original 100% scale but FDM printing doesn't handle the small features very well, but when printing at 140% scale (only 19.5g), the new features work really well! A few prototypes later, I dialed into good tab and notch locations that hold the parts together nicely.
Changes:
- The large wingspan part has all the new pockets (green arrows).
- All other parts have tabs (red arrows) that snap into these pockets.
- Also added new flap details on the bottom of the wingspan part (the same ones you see on the top side).
Note: you may have to wiggle/twist the parts a bit to get them to slide in place. With patience, you will hear a satisfying “click” sound as they snap together. You can add glue if you want to make everything permanent - the pockets make for a great marker for where the glue needs to go, and the tab/pocket system makes for a much stronger glue joint!
Note: I've only made this change on the parts without the “tree” or “sprue”. If there is enough interest, I can transfer these mods to the model with the tree/sprue.
If you download this model and/or add it to your collection, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Thanks again to @PhabulusPhantom for giving me a great model to work with!
Happy Printing!