Electronic Component Tester Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the look of https://www.thingiverse.com/thing:3027565 but wanted a few extra features so I created this…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I liked the look of https://www.thingiverse.com/thing:3027565 but wanted a few extra features so I created this version which includes holes for three panel-mounted 4mm safety sockets and a 3.5 mm mono jack.
The tree 4mm sockets are Hirschmann/SKS SAB 2600 G M4 and are connected to the test points 1, 2 and 3 so that I can use regular test leads and clamps.
The 3.5mm mono jack is connected to the TEST button and can be used to connect an external start switch - in my case I wanted to be able to connect a foot pedal to start the test when I need both hands to get a good contact with the component.
I also created a lid for the battery compartment. This one should be printed with a flexible filament as it also just snaps in place.
I included the Fusion 360 file that I created from the original STLs in case somebody wants to make further modifications.
Category: Electronics