1 / 1
Card Holder for Red Rising or other boardgames
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Interlocking and only cover up 3mm of the bottom. 1, 2, and 3 card width versions (Based on 65mm card).
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 119
- Wydruki
- 2
- Wyświetlenia
- 663
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (35)Powiązane
Interlocking and only cover up 3mm of the bottom. 1, 2, and 3 card width versions (Based on 65mm card).