Honda BF40 Water Intake Screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement intake screen for the bottom of a 1999 Honda BF40 outboard boat engine.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This screen was designed to replace the intake screen/filter on the base of a 1999 Honda BF40 outboard boat engine. It may fit the same engine made in different years but I cant verify that.
They're rare to find online replacements for so an hour of swearing at Fusion360 and two prototypes later, here it is.
I tried to match the OEM design as best I could but it has not been tested in any kind of fluid simulation so use at your own risk.
I printed in PETG @ 100% Infill with .2mm Layer Height and I also slowed the speed down to 40% until the printer had finished printing the meshed holes.