Fireplace remote wall switch plate cover (Skytech)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A customized 2-box replacement for a Skytech fireplace remote receiver. The wall plate that came with the Skytech…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A customized 2-box replacement for a Skytech fireplace remote receiver.
The wall plate that came with the Skytech 1001TH-A kit for use if the receiver was to be wall-mounted was sized for a single-box installation. The original wall switch in my house was ganged with a heatilator rheostat in a two-box side-by-side configuration, so the provided wall switch plate wouldn't work. I designed a customized plate that would both hold the receiver module and cover both boxes.
The pictures show the finished product as well as the prototype. I printed it face-side down.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Notes:
When flipped face-side down in a slicer, the edges of the plate don't need support, but the receiver clip overhangs do. I used support enforcers in PrusaSlicer to create supports for only those overhangs.
Category: Replacement Parts