SodaStream bottle base holder stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your SodaStream bottles from tipping over.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
SodaStream bottles have a tendency to get knocked over easily, especially when empty. Inspired by SodaStream Base for 1 L Slim Bottles by filerm and SodaStream bottle holder by nfriend, I remixed them into this bottle base stabilizer. It only uses ~37g PLA and is perfectly stable. Just press and twist to friction fit onto the bottle. Twist and pull to remove it.
Designed for line width of 0.4mm and 3 walls, prints without infill nor supports (max 20° overhang).
Two files, two different designs:
- SodaStream_bottle_base_v01.stl has vertical exterior walls.
- SodaStream_bottle_base_tapered.stl has slightly tapered exterior walls. This allows the bases to be stacked when not in use if you print multiples.
Rafts: No
Supports: No
Resolution: 0.16
Infill: 0%
Filament brand: Atomic Filament Perfect Yellow PLA