1 / 2
Tall Crown LCD Knob
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A LCD knob that vaguely resembles a crown.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Originally created as something different than a LCD knob by doodling and ended up with what kind of resembles a crown. Then I saw that Printables had a contest for creating LCD knobs, so I reworked the model and ended up with this.
I also made a lower version of this model: https://www.printables.com/model/243576-crown-lcd-knob
I have printed this model and tried it on my Prusa Mini. The hole for the rotary encoder is modelled after the original knob and tested to fit.
Print tips:
- Print it with the hole towards the heatbed.
- Supports not required.
- My preferred layer height is 0.24mm first layer and 0.16mm for the rest.
- 15% gyroid infill works.
- PETG recommended.
- Brim not required.
~Modeled in OnShape~