Pointy Haired Boss - MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MMU version of Pointy Haired boss Pointy Haired Boss from the comic strip 'Dilbert' by Scott Adams.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 192
- Wydruki
- 4
- Wyświetlenia
- 812
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MMU version of Pointy Haired boss
Pointy Haired Boss from the comic strip 'Dilbert' by Scott Adams.
In the comic strip, the Pointy Haired boss provides a fountain of wisdom, which you need to avoid at all costs.
The model, as presented is 70mm tall.
This MMU model was derived from my non-MMU model (reworked for a clean MMU print):
https://www.prusaprinters.org/prints/348-pointy-haired-boss
Enjoy! And don't forget to post your makes.
Print instructions
I've included an MMF file that I used for this print.
Individual STL parts are also included.
Be sure to check/set the purge amounts for the colors based on your filament brand.