Voron XY-endstop pod for microswitch PCB, 3mm extra space
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mounting part for the X/Y-Endstop pod of the Voron 2.4
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 241
- Wydruki
- 0
- Wyświetlenia
- 1919
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a mounting part for the X/Y-Endstop pod of the Voron 2.4, actually a remix of
https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/randell/Microswitch_Endstop
I found the original design restricts X a bit on the right side and made this version which moves the switches 3mm to the right side.
PAY ATTENTION: This moves the endstop PCB 3mm towards the right panel. It works well on my printer which uses 3mm foamtape under the panels and flat glas panels. If your panels sagged under heat or are installed with thin 1mm foam tape, the pod may scratch the panel. I used the 3mm foam tape which is stock and the pod stays clear of the panel.
If you want to make your own modification, here is the link to the model on Onshape - you can export it as Step, or make a copy to work on if you have a free Onshape-account.