Sensor for creating a height map with dielectric surface for CNC3018 machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
to create you will need a used or broken cutter for a collet 3.175mm, with a tail length of at least 1mm (in my case,…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
to create you will need a used or broken cutter for a collet 3.175mm, with a tail length of at least 1mm (in my case, this is a 0.5mm corn cutter of which 1.7mm is left). spring and ejector pin from the CD or DVD drive of the old laptop and straight hands.
Also, to adjust the stiffness of the spring you have selected, you may need a bushing, it can of course be built from improvised means, but I preferred to print it as well, it is in the download files
According to the test results, the error does not exceed 0.0106mm.
Printed with a 0.2mm nozzle
layer height 0.1mm
speed 15mm / s
filling 100%
material PET-G
P.S. Created by CNC3018
Category: Machine Tools