Flexible TPU Wallet with Coinpocket! (Print in Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOT the next hardcase wallet! Flexible wallet for cards, bills and coins!
- Ocena
- 4,833 / 5
- Polubienia
- 539
- Wydruki
- 8
- Wyświetlenia
- 28 872
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
Nearly every 3d printed wallet is a hardcase wassel or card holder; thats okay but I'm not a fan of it and I also need space for cash and the change.
So lets break down a simple normal wallet:
- its foldable
- space for cards
- space for bills
- and a coin pocket
Alright lets take these four topics to design the perfect 3D printed wallet.
I don't want a hardcase wallet and it should be foldable?
- Only solution here is, flexible material. so I choose TPU with a shore hardness of 95A
Space for Cards and for Bills aren't that challenging.
I just need to create small pockets which dont fuse together while printing. Thats how I came up with the design and Print orientation like it is. Closed and standing up.
There are 3 Slots for 3-4 Cards each! so up to 12 Cards in total!
The most challenging part to design was the coin pocket.
I don't wanted to change the orientation of the model so I needed to fit it in like the model was set.
I designed it so it can be enlarged by itself after printing. And also the lash ist coming down perfect so the holes for the buttons will just allign perfectly.
I use this push buttons for the coinpocket, you can find it on Amazon.
Since then I used it as my regular wallet and it survived without any damage. It just got a little bit dirty over the time while i tested it by using it every day!

Print it standing up, like it’s orientated in the file.
Use a brim to get better bed adhesion!
Use 2 Perimeter and Infill around 30%, no Support and ofcourse use TPU