Blood On The Clocktower box for tokens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra Token box for the game "Blood On The Clocktower" for my lovely wife.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 2349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
You can see the use of the box:
Lid can be printed using 3 colors, with manual change, or just the lid, then the text will still be visibel as an indentation.
Designed just using Thinkercad and PrusaSlicer.
Used my stock MK3S with PrusaSlicer configured to 3 print heads, that will result in manual filament change for each layer, only needed for the first two layers.
Technique descriped in this video: https://www.youtube.com/watch?v=OBxocd2nDR0
Can just fit and print diagonally on the Prusa MK3S.
Since print is a little to large but will print fine, the newest version of firmware and Octoprint will complain. Please follow this guide: https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-software-archive/octoprint-object-exceeds-print-volume-in-depth/
I use the following parameters, please use them at your own risk, they work fine for me:
Custom Bounding box: True
x Coordinates min:-1 max:251
y Coordinates min: -5 max:212
z Coordinates min:0 max: 200
Since it is only the 1 skirt loop that is the problem, you might set Skirt Loops to zero, but i have not tested this.
Please leave a comment, if you print it or find it useful.