No-Sew Carabiner / Velcro Strap / Camera Plate Backpack Hack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a Velcro strap or carabiner hook to your backpack with nuts and bolts.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 998
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
All you need is a couple of M3 screws, a couple of heat-set inserts, and tool to poke a couple of appropriately spaced holes, and you can add a carabiner hook, camera-mount plate, or Velcro strap (or anything you can imagine?) to your backpack, laptop bag, or camera bag. Any bag.
It is a bit cooler if you print the templates, get yourself a 3mm leather punch and four 10x3mm magnets. Then you can use the alignment jig and a hammer to tap nice, clean holes in exactly the right place.
So far, I have tested the camera plate on an old backpack, and it had no problem lifting 42 pounds. I will have to rig up something much more complicated to do a proper durability test, but I am confident that it will hold up your water bottle.
You can get a little kit with the correct leather punch, four magnets, and rubber bumpers to use with your no-sew template from my Tindie store.