Fly Screen Mount or Retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An old style fly screen mount or retainer. These have been printed in PLA and have been in place for nearly two years.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
An old style fly screen mount or retainer. These have been printed in PLA and have been in place for nearly two years.
The original version screws to the fly screen frame and has a spring loaded pin to hold the fly screen in place. The replacement version has the same profile; but just uses a screw or bolt instead of the pin.
The original version just isn't available anymore and it is far cheaper to make these 3D printed replacements instead of replacing the whole fly screen frame.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Any PLA or PETG or ABS Any
Notes:
Use three to four perimeters and layers all round.
Category: DIY