Impossible Japanese Tsugite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replica of a seemingly impossible Japanese Tsugite (traditional joinery)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Following on from the Mysterious Tsugite here, I moved on to the next one, which is the 4-way goose-neck joint but titled the “impossible joint” in the source video. This was also created in OpenSCAD but has been a bit of a pig to find the right tolerance and print orientation. The dimensions aren't the same, especially of the goose necks but I wanted to keep it compact. I managed to get a workable print with a tolerance of 0.3mm that was still a very tight fit but has become much more workable with repeated fitting. The source video is here…
The model file uses a 0.2mm layer height but 0.1mm gives much crisper text.