Protective Cases for AirTag Accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pendant or rounded corner case to protect your AirTag accessory from scratches.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 318
- Wydruki
- 2
- Wyświetlenia
- 1092
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pendant case to attach an AirTag accessory to a bag or backpack. The rounded corner case can be used to put an AirTag accessory into a bag or suitcase and still protect it from scratches.
Print out the lower and upper part, insert the AirTag accessory and close the case by twisting it clockwise until the locking mechanism latches. The case can be reopened by twisting the two parts counter-clockwise.
For the pendant case you'll need an additional ~36cm long cord (3-3.5mm diameter). Print out the cord seal parts, put glue on them, insert the cord ends and press the two halves together.
Legal notes
The cavity for the AirTag accessory is based on the model of mediaman.
AirTag is a trademark of Apple Inc.