Print In Place Tripod V0.9
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adjustable Print In Place Tripod with all 3 legs moving simultaneously. GoPro mount & Camera mount included.
- Ocena
- 4,667 / 5
- Polubienia
- 95
- Pobrania
- 472
- Wydruki
- 6
- Wyświetlenia
- 3445
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This model is still V0.9 because I'm still doing some improvements, as soon as you see V1.0.0 in the title then that means I'm happy with it.
This print requires a well calibrated 3D printer as it relies on tight tolerances to be printed in place.
Choose between the GoPro mount and Camera mount and click print or check out @Jackal3D 's page for an extention of this tripod to mount your phone with his universal phone mount.
After you remove it from the bed, twist the adjusting knob to unlock the worm gear (in case it got stuck) and adjust the knob until the tripod looks like the title picture.
Printer settings:
- 100% Infill (Advance users can use the MMU file and select 100% infill only for the tripod legs)
- 0.1mm layer height (or use variable layer height close to 0.1mm for the worm gear) Example Gcode uploaded
Update: V1.0.0 is now uploaded, but still untested.
Updates in V1.0.0 Untested:
- Indication where to stop extending the legs (Next version will have stoppers)
- Small improvements in terms of the print-ability of the model
- Thicker legs
Busy designing V2.0.0