Bracket for Moon Cerberus rear LED light on pannier rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
easily-printed bracket to attach to the standard mounting holes on most rear panniers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Moon Cerberus rear bike lights are very popular but they mount on the seat post and if you have a rear pannier it usually blocks the light from view. This two-part print will bolt to the two holes usually present on the back of most pannier racks, and provide a post for the light to securely clip to. It also cannot slip off downwards.
Print in the parts, and screw them together with two M3 x 15mm bolts. Up to 18mm is fine. 20mm will bottom out so don't do that. Bolt to your bike with M5x8 or M10x10 bolts, adding a washer if needed (the threaded holes are 6mm deep). In both cases the screw threads are printed in the model, no need for inserts or tapping.
I dont think layer height is important, I used 0.2mm for our two bikes. If you live in a hot climate consider using white PLA or even PETG so it doesn't melt but here in Wales black PLA is fine.
When printing, lay both parts flat in the obvious way. Turn off supports, there is a sacrificial layer to support the threaded holes in one part, so no supports needed.