Pico Label Plate: Pin labels for Pico!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of how Raspberry Pi Pico has no pin labels top? Me too! Here's a solution.
- Ocena
- 4,8 / 5
- Polubienia
- 50
- Pobrania
- 290
- Wydruki
- 5
- Wyświetlenia
- 1998
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Pico Label Plate consists of a small 3d printed piece that sits on top of the Pico and provides a surface for a label to be affixed. The included label has all the pins noted, just like the top of a PCB should have. Or just use the Plate Label Plate without a label to protect the Pico circuitry. Works on both the original Pico and the Pico W.
The plate sits on the Pico but doesn't clip on permanently so you can quickly remove it if needed. It doesn't cover the header pins or the BOOT button, and you can even click the BOOT button with the label on.
What you need:
- 3d-print of “PicoLabelPlate.stl”
- Paper print out of "PicoLabelPlateLabels.pdf"
- Single-sided clear tape (Scotch gloss tape)
- Double-sided thin tape
- Scissors
To make:
- Apply clear tape to paper label, cover entirely one label
- Carefully cut out taped label
- Apply double-sided tape to PicoLabelPlate
- Line up paper label on plate, press down
- Set PicoLabelPlate on top your Pico!
Demo!