Xbox One, XBox X|S and PS4 RAM Compatible Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a gaming controller holder for Xbox One and PS4 controllers compatible with a B-Sized RAM mount system.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Sometimes when gaming, mounting the controller can make all the difference.
This is a gaming controller holder to allow for your controller to be mounted using a B-Sized RAM mount system. There is one version for an Xbox one controller, which attaches to your controller by replacing the battery cover, and another version for a PS4 controller which snaps around your controller. Once secured onto your controller, the other end has a 1 inch ball that fits into the B-Sized RAM mount socket.
The Xbox One version was based off of this Xbox One battery cover from Thingiverse: https://www.thingiverse.com/thing:2764274
Print Settings
Infill: 10%
Resolution: 0.2 mm
Supports: Yes
Notes
Print in the orientation of the STL file, with the ball coming off of the mount parallel to the build plate. This is so the bending needed to get the mount on the controller will not snap the print between the layers.
Used 2.5 shells.
It is possible to print the XBox version with the ball oriented straight upward. This results in a smoother ball, with sufficient but slightly less strength.
Made in the Rehabilitation Engineering department at the Stan Cassidy Centre for Rehabilitation
Part of the Horizon Health Network
Learn more about our centre at: https://horizonnb.ca/horizon-services/provincial-program/stan-cassidy-centre-for-rehabilitation/