Paintball Marker Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple stand designed to display a paintball marker.
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 1028
- Wydruki
- 3
- Wyświetlenia
- 3951
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
This paintball marker stand was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, screw the ASA adapter snugly into the marker, try to make one of the fins on the ASA adapter parallel with the marker's grip frame (don't worry if it is not perfect), and slide the ASA adapter into the stand.
Print Settings: 20% grid infill, 0.2mm layer height, no supports
Please note that I have never printed these out of a material other than PLA and there may be better print settings. I am not sure if the tolerances are compatible with the slight shrinkage of PETG or other materials. Feel free to modify this design!