Lawnmower Blade Balancer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool that checks if your lawnmowerblade is balanced after sharpening, to ensure you have a super lawnmowing experience
- Ocena
- 4,5 / 5
- Polubienia
- 96
- Pobrania
- 1220
- Wydruki
- 9
- Wyświetlenia
- 3788
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D MODEL DESCRIPTION
My father needed a blade balancer for his lawnmower blade this summer, so I designed him one.
How it works:
If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove material from that side, and test again.
When the blade sits horizontal on the balancer, the blade is balanced.
Good luck printing it, and I hope you find it useful :)
3D PRINTING SETTINGS
Filament: PLA 1.75mm wide
Nozzle: 0.4mm
Nozzle temp: 210c
Bed temp: 50c
Layer Height: 0.18mm
Supports: no
Print time: 1h 20min
Printer: FlashForge Adventurer 3
The 2 parts can be printed on the same time