1 / 2
Tenlog TL-D3 Pro BMG Extruder Tension Lever — zdjęcie 1
1 / 2

Tenlog TL-D3 Pro BMG Extruder Tension Lever

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print a spare tension lever for your TL-D3 Pro BMG extruder! Just requires a M3 heat set insert and you're good to go!

Ocena
5 / 5
Polubienia
14
Pobrania
112
Wydruki
1
Wyświetlenia
927
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The Tenlog TL-D3 Pro with the BMG extruder upgrade is a great machine - but ours had a slight issue recently with the extruder lever breaking, I think due to a clog. I reached out and collaborated with the awesome folk @ LNL 3D Solutions, and I was able to modify and get this extruder part printable to share with the community.

The part prints nicely with the flat side down on the bed, with a decent infill (35-100% recommended) and no supports. Depending on the tolerance of your printer and how well it is dialed in, you may need to drill out the holes for a better fit of the gears and assembly. An M3 heat set insert is needed in order to fit the tension screw and spring together - see the photo for where the insert should be placed.

happy printing!

Tagi