Parametric Snap Together Credit Card Wallet V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric, minimalist, snap together, credit card wallet with built card lock to keep the cards in place.
- Ocena
- 4 / 5
- Polubienia
- 24
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 1476
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Design Requirements
A simple, usable wallet that's easy to print, requires no glue, and can be adjusted to fit any size requirements.
FreeCAD Parameters
Note: Not all parameters will work as expected, I'm not planning on putting any more effort into this project, but if anyone wants to try their hand at remixing it and making it better feel free.
Card Width =54mm
Card Height =86mm
Card Thickness =1.2mm
Wall Width =4mm
Cover Thickness =1mm
Lever Width = 10mm
Lever Thickness = 2.5mm
Lever Fulcrum Inset = 20mm
Lever Opening Width = 15mm
Pivot Radius = 2.5mm
Tolerance = 0.3mm
Card Count 9
Spring Inset =1.5mm
Printing Setup
Printed with PETG using a .4 mm nozzle and no supports
Remixes
Converted to be parametric, and cleaned up model a bit.
First Impressions
Seem to work as well as the previous version which I've been using for over a year. The only issue I have seen so far is that I can't change the parameters two hold more than 9 cards. I will need to figure out why that isn't working.