1 / 1
150mm Tube Rings for Celestron C5 SCT — zdjęcie 1

150mm Tube Rings for Celestron C5 SCT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A set of basic tube rings for the Celestron C5.

Ocena
0 / 5
Polubienia
11
Pobrania
151
Wydruki
0
Wyświetlenia
1001
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A set of basic tube rings for the Celestron C5 that allow for mounting to a Vixen-Type Dovetail Bar.

The Tube Rings have an internal diameter of 150mm. They should fit any instrument with that same diameter casing (not to be confused with objective lens/mirror diameter).

Please note that to assemble the tube rings you will need 3 Bolts (20-25mm Length, ¼" Diameter Approximately). The tube rings are also slightly over sized to allow room for a 1mm layer of foam padding.

Tagi