9v Battery Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to not only store my batteries but also make sure that they all get rotated through service. I was…
- Ocena
- 4,8 / 5
- Polubienia
- 27
- Pobrania
- 186
- Wydruki
- 5
- Wyświetlenia
- 1490
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I needed a way to not only store my batteries but also make sure that they all get rotated through service. I was having one or two batteries at the bottom of my storage case that would not get used and re-charged. This solves the problem for me. I also made a AA version and a AAA version.
Print Settings
Printer:
Artillery X1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
variable
Infill:
15%
Filament:
generic petg
orange
Notes:
I print fast and dirty using .35mm height and 1mm width up to the top layers which I print with .2mm height and .35mm width so that the two parts will mate with the little tongue and groove. It seems to work out quite well, but if you prefer to have prettier prints then you could print the whole thing in .2mm and it will work out fine.
Category: Organization