Lumen PnP Ploopy Feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Ploopy Pick-and-Place Feeder for use with the Lumen PnP
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 333
- Wydruki
- 0
- Wyświetlenia
- 2150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
This is a remix of the Ploopy Pick-and-Place Feeder that has been modified to work with the Lumen PnP, along with several improvements to the basic mechanisms to improve reliability.
- Added a mounting bracket for installation on the Lumen PnP feeder rail
- Changed the angle of the lever arm to clear the Lumen PnP staging plate
- Added an integrated reel holder
- Angled the tape ejection chute downward to clear the bottom of the component reel
- Improved the tape peeler blade design
- Added a printed spring to press the tape against the peeler blade
- Improved the ratchet wheel interface strength
- Added an optional version of the ratchet wheel that doesn't require the use of a bearing
Required hardware:
- 6x M3x16 flat head cap screws
- 6x M3 nuts
- 1x M3 washer (install between the lever arm and the feeder body)
- 1x 10x15x4mm 6700 ball bearing (optional)
- 1x 0.5x5x25mm compression spring
Suggested print settings:
Material: PLA+/PETG/ASA
Layer Height: 0.2mm
Line Width: 0.4mm or less for the ratchet wheel, 0.4-0.6mm for everything else
Infill: 20%, cubic
Supports: Only needed for the ratchet wheel. From bed only.
While it may be possible to adapt this feeder design to other tape widths, the fold-over cover tape peeler design really only works for 8mm tape. Maybe 12mm at most. Larger tape sizes would need a new cover tape takeup system, which is not addressed by this design.