9mm Chamber Flag / Lollipop / Recessed "9" / v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First attempt at a safety chamber flag for my 9mm. Standard "lollipop" design but with an inset "9".
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 343
- Wydruki
- 1
- Wyświetlenia
- 1601
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was my first attempt at a chamber flag. Worked very well and I've printed out many for both myself and friends. Never had an issue releasing the slide down onto the flag. Rounded “lollipop” design reduces snags. This version also has an insert “9” to help separate from other caliber flags.
I printed this using PLA at 50% infill with .15 resolution. Hint, if you're going to blacken the number use either black epoxy putty or black paint. Hint-v2, if you use paint, coat in poly first to seal all the cracks and crevices before the point or else capillary action will pull the paint EVERYWHERE and you'll never be able to sand it all out…
Like my design, how about a cup of coffee?
