Mason Bee Cocoon Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drastically increase your success by storing cocoons indoors vs. leaving them outside in their bee house during winter.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a remix of the bee incubation box. I printed one and it was perfect for releasing mason bees as they hatch from their cocoons. However, I wanted something for winter storage after harvesting cocoons from their bee house. I sealed off the exit doors, made a divider, and included some air holes for better circulation.
The model is scaled to 200% compared to the original, but depending on how many cocoons you have, you may want scale it down.
No special printing requirements, I printed in PLA at 20% infill at 45mm/s. Box portion took a little over 24 hours. The time will obviously be reduced if you choose to scale down.
Put your cocoons on one side of the box and a slightly damp paper towel/sponge on the other. Store in the fridge. Make sure to check every week or two to see if you need to replace the paper towel or add a touch of water to the sponge.
It's best to keep the fridge around 4 degrees Celsius. The paper towel/sponge should be slightly damp. Water should not spill out when squeezed (couple drops is fine).
*Before storing, it's ideal to clean the cocoons. There are many helpful sites that can cover this process.
Remixed from Thing 2192719