Wemos D1 Mini Temp-01
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm starting to add some "smart" devices to the families house. This one can house a Wemos D1 mini and a DHT22 sensor.
- Ocena
- 3 / 5
- Polubienia
- 29
- Pobrania
- 299
- Wydruki
- 2
- Wyświetlenia
- 3403
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I'm starting to add some "smart" devices to the families house. This one can house a Wemos D1 mini and a DHT22 sensor. The design is straight forward, no fancy mounts or places for screws, because I'm using parts that I already have. So relays, clamps and converter might change from build to build. Just hot glue in the components and snap the case together.
If you're interested in this one, you might want to check these, too:
https://www.prusaprinters.org/prints/17287-wemos-d1-mini-plug-04
https://www.prusaprinters.org/prints/16723-wemos-d1-mini-plug-03
https://www.prusaprinters.org/prints/16607-wemos-d1-mini-plug-02
https://www.prusaprinters.org/prints/16445-wemos-d1-mini-plug-01
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.25mm
Infill: doesn't matter
Filament: Das Filament PETG Weiß / white Post-Printing
Wire up the components, hot glue the components to the bottom plate (roughly labeled) and click the bottom and the cover together.