Wool Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is a work in progress. I will not be able to support further development of this project.
- Ocena
- 4,071 / 5
- Polubienia
- 538
- Pobrania
- 2079
- Wydruki
- 16
- Wyświetlenia
- 21 585
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
https://www.printables.com/model/1453503-wool-winder-upgraded-parts
^Checkout this remix, it's an upgrade over this model.
This design is a work in progress.
SO: "I want to buy this wool winder and yarn swift, it'll help me kit better"
me: "ok, how much is it?"
...later
me: "is it ok if I 3D print it?"
SO: "uhh yeah, just don't take forever"
Here we are 2 months later. I've got my first draft of the wool winder printed and I'm still working on the Yarn Swift (I'll link it once it's up). https://www.prusaprinters.org/prints/24617-yarn-swift
I've designed this to be used at the edge of a tabletop with 1 or two c-clamps to hold it in place for use. To build this you'll need:
3 M8x80 bolts,4 M8 washers
2 M8 nuts4 skateboard bearings.
Planned updates:
Improved yarn threader armbase clamps using 3d printed/threaded clamp
reduced mechanism sizeoptimized bobbin size (I'd appreciate comments on this)
Print instructions
I printed this in ABS with 4 perimeter layers at 15% infill.