Gridfinity 1x1 AirPods Pro box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Graphically grasp your garish AirPods Pro, in this great gridfinity gripper.
- Ocena
- 4,833 / 5
- Polubienia
- 49
- Pobrania
- 502
- Wydruki
- 6
- Wyświetlenia
- 2777
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Gridfinity is life, gridfinity is power.
I'm converting my office “quick grab stuff” cupboard to gridfinity, which means I needed a holder for my AirPods Pro case. Other airpods gridfinity options exist, but they typically mount the case charging-port-down and require 1x2 grid slots.
Not content with that lax approach to space efficiency, I decided I would bend the space time continuum to get the airpods wrangled into a 1x1 bin. (Actually I just rotated the case 90 degrees on one axis and 45 degrees on another, but that isn't as exciting).
Printed on a Prusa Mini+ with the 0.25mm DRAFT profile, no supports required.
To create this I used vector76's OpenSCAD project[1] to generate an empty 1x1 bin and then used Shapr3D to model the interior for the AirPods to nestle in.
[1] https://github.com/vector76/gridfinity_openscad