1 / 7
18650 flat top battery holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery holder for at least 17x 18650 flat top batteries, prints without supports, no assembly required.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 651
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (19)Powiązane
This is a sturdy battery holder for 18650 flat top cells. The holder can at least accommodate 17 cells. No supports are needed for printing.
Print settings
Layer height: 0.28mm
Top / bottom layers: 4
Perimeters: 3
Infill: 15%
This model can be printed in PLA, PETG, etc. The model shown is printed in PLA (Innofil3d PLA Pearl White).
This model prints in one go and without supports. No assembly is required after printing.