Server Hard Drive (2.5") Tray CDROM Slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I removed the three CDROM trays from my standup server and wanted to fill it in with 2.5" drives. I printed this to…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I removed the three CDROM trays from my standup server and wanted to fill it in with 2.5" drives.
I printed this to allow that expansion of the drives.
This is a work in progress until I get it test printed
Itwill hold six 2.5" drives in the trays. At this time there is not fasteners, they will just lay flat.
TODO:
- Test the heating of the drives vs warping of the fins
- SAS connectors are slightly off (v1)
- Photos of the part in use
- Model without cutout text
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.3 (draft)
Infill:
25%
Filament: Any PLA Any
Notes:
Testing different infills for best hold at higher heats vs printing cost.
Category: Computer