Fully Printed Drill Stand Carriage for Proxxon 60/E
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a carriage for tifn's fully-printed Proxxon drill press:https://www.thingiverse.com/thing:4903575. They've…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a carriage for tifn's fully-printed Proxxon drill press: https://www.thingiverse.com/thing:4903575.
They've provided a wonderful OpenSCAD file. I found that my Proxxon 60/E rotary tool had slightly different dimensions than their 230/E.
The only difference is that the larger ring has an inner radius of 17.5mm instead of 18.3mm. After printing this I think the original small radius of 10mm would work better, so I've uploaded that file. I was testing these by printing it on it's back, and unfortunately I think that was changing the dimensions slightly. The current dimension is tight on the large ring and very tight when the nut is turned. With 10.1mm on the small ring it is loose and just barely tight when the nut is turned.
Category: Machine Tools