Filament Storage Shelf 1kg and 3kg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and strong filament shelf. Made to fit 13/16" (~20.5mm) dowels. Mounting holes sized for standard drywall…
- Ocena
- 5 / 5
- Polubienia
- 109
- Pobrania
- 491
- Wydruki
- 6
- Wyświetlenia
- 3806
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple and strong filament shelf. Made to fit 13/16" (~20.5mm) dowels. Mounting holes sized for standard drywall screws.
Printing:
I used 5 walls for strength and 20% infill. I printed the first set at .2mm but I liked the look (and speed) of .32mm better. There's really not much to it.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: Amolen PLA Matte Blue
Notes:
This is a pretty simple print. Just takes a little time. with .32mm I got it down to about 9 hours a pair. You know you spent longer printing Baby Yoda.
Category: 3D Printer Accessories