1 / 2
Wall mount for Teltonika RUTX09, RUTX11, RUTX12 and similar — zdjęcie 1
1 / 2

Wall mount for Teltonika RUTX09, RUTX11, RUTX12 and similar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall mount for Teltonika routers with the same dimensions as the RUTX11 router.

Ocena
5 / 5
Polubienia
23
Pobrania
454
Wydruki
1
Wyświetlenia
2392
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

The wall mount is designed to keep the router securely in place, in my case in a camper van. Compared to the model I remixed this from, this mount uses much less material therefore prints much faster and is designed as a snap-on: a tab allows to remove the router easily. I added a small rim to keep the router in place even if the material flexes due to heat. This works best if the tab is oriented to the top.

Recommended to print in PETG, but PLA should also work as long as the router is not mounted in a hot environment (car, campervan).

Tagi