Non-MagSafe MacBook Continuity Camera iPhone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(Yet Another) Non-MagSafe Continuity Camera for the new MacOS and IOS16 (Remix of samlovecroc)
- Ocena
- 4,75 / 5
- Polubienia
- 12
- Pobrania
- 174
- Wydruki
- 3
- Wyświetlenia
- 1132
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of a Continuity Camera. It has a wider slot for the phone to sit, ensuring it won’t fall out. Also the slot for the phone will fit all phones and most phones with cases. If there is a huge gap, I designed 1mm, 2mm, 3mm, 4mm, and (if needed) 5mm. There will also be a small gap between the MacBook screen and the print, preventing scratches or other damage. To fill this gap I would use something soft like a little peace of microfiber cloth, paper, or even a scrap peace of TPU.
If you have a MacBook Air, I recommend printing the version with the clip (Says “with clip” on file) since a MacBook Air screen is thinner and slightly tapered. This clip model just needs a pen spring at least 1.5 cm long. Again, if there is a gap in the phone slot just print the spacer or find another solution.