Virpil Rudderpedal Chair Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Something to get your Virpil Rudderpedal from pushing your Chair away.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Simple Mount that uses a M10 Threaded rod to link Virpil Rudder pedals to a chair with rollers that have a Footprint of 70x55mm.
BOM:
M10 Threaded rod 1000mm (common length) and cut to size depending on the prefered position of the pedals
2-4 Nuts M10 (only 2 are Needed, 4 are used to get Mounts from Sliding on the Rod)
Printsettings:
Material: doesnt really matter, printed mine in PCTG. TPU might work, i dont recommend it
Nozzle Size: used a 1mm Nozzle, bcs who has time to wait for it to finish. 0.4 should work
No Supports needed
Be aware that the Pedal Base is 325mm Long, had to print it diagonaly on my Sidewinder
As a Disclaimer, this Design is still WIP and i will adjust stuff based on Feedback