Big battery mod for Ham Chest Radio Go Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod of the original battery tray to hold and secure a single big battery.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 898
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This model is based on the original Ham Chest Design from SwiftyTheFox. Thanks for sharing!
This modification of the original battery tray enables you to store a single big battery instead of the two smaller ones. With the SCAD file you can easily create a tray suitable for your individual battery. I also provided two sample files for a 133x100 and a 151x98 (width x depth) battery. Shown on the pictures is the 133x100 version.
Note: The sample files have 1mm extra space in every dimension since I figured out, that my battery was not fully even. I used sticky tape to extend the depth and width of the battery so it securely fits into the tray.