1 / 2
Storage for wooden sticks and leftovers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage for wooden sticks and leftovers
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I'll need a storage for wooden sticks and leftovers in my workshop. In the past I used tubes for that, but every time you have to empty the tube completely. Now I want a storage where I can see the content. This ist the result.
I used PLA this time but for the next I will take PETG. The side holder are from wood ~15x10mm and aluminium scrap but you can use wood too.
Diameter: ~180mm