Anycubic Mega Zero 2.0 Front V-Slot Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Mega Zero 2.0 Front V-Slot Cover
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 523
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modified the front V-Slot cover to print it in one piece instead of 2 pieces.
Also the length is modified to fit the Mega Zero 2.0 better and added a sloped part that fits nicely into the V-Slot of the Z aluminum profile.
The part needs to be printed diagonally on the bed because the length exceeds the width of the bed.
I've also used a brim because the ends have a tendency to curl up.
ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller Patreon subscription.