1 / 2
1 hour Vase mode AA battery box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this model to print quickly in Vase mode. It holds 16 AA batteries and prints in under 1 hour.
- Ocena
- 4,8 / 5
- Polubienia
- 46
- Pobrania
- 256
- Wydruki
- 5
- Wyświetlenia
- 929
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 7)Remiksy (1)Kolekcje (41)Powiązane
I designed this model to print quickly in vase mode. I love designs which use minimal time and material. This is one of only a handful of designs I have made and I learned some valuable lessons along the way.
It is printed with mostly default PrusaSlicer profiles, a 0.4mm nozzle, 0.45mm extrusion width, 3 bottom layers and 0.28mm layer height in vase mode.
