Battery Dispenser/Holder/Box AA (x10) # fifo # kiss
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery Dispenser/Holder/Box AA (x10) # fifo # kiss # tidiness # fifo # kiss Easy to print without support!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
//////////////////////////////////////////////////
Battery Dispenser/Holder/Box AA (x10)
# tidiness # fifo # kiss
//////////////////////////////////////////////////
→ easy to print
→ fast
→ ultra low costs
→ without support => without trouble!
- @0.4mm Nozzle
- 2 outer layers
- solid layers 3 / 3
- 5 % Infill (gyroid)
- ironing
- 40 g
- 0.80 $ printcosts
- in 3.47 h (standard speeds)
- @0.8mm Nozzle
- 1 outer layer
- solid layers 3 / 3
- 5 % Infill (gyroid)
- ironing
- 27 g
- 0.55 $ printcosts
- in 3.23 h (standard speeds)
→ so why go out and buy something in a 99 cent shop?
- at least with adapters - mountable nearly anywhere
- easily scaleable for other battery formats
- btw it holds 10 Batteries
Story:
_______
My batteries are always rotating between my radio-receiver for my headset, the charger and the dispenser.
Fifo is a must have for me and i wanted to mount the dispenser on to the wall behind the charger.
So - here it is!
Note:
I glued a transparent plastic plate onto it from the inner, so the batteries always fall into their correct postition.
(Transparent tape from innner and outer will also work)
///////////////////////////////////////////////////////////
https://www.paypal.com/paypalme/satch5150
///////////////////////////////////////////////////////////