TravelPro rolling luggage replacement foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ms scruss has a soft-sided rolling case, TravelPro brand, that one of the feet broke off while travelling. While this…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
ms scruss has a soft-sided rolling case, TravelPro brand, that one of the feet broke off while travelling. While this didn't affect what it could hold, it meant it didn't stand upright.
This thing may act as a replacement. If your luggage uses two M4 bolts on 50 mm centres and has a foot 50 mm long, this might work.
NB: TravelPro use fake screws to hold the foot in place. They are actually rivets of some kind that you'll have to cut/deform to get free. I used a variety of mole grips, cutting tools and swearing — use whatever you have.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.3 mm
Infill:
80%
Filament: eSun PLA+ n/a
Notes:
I'm not sure if this will hold up to even one flight, but even so, I printed this at 80% infill with lots of shells.
**Update**: after several trips, it's holding up well. It's also really easy to find on the carousel, since it's the only bag with the weird-ass-lookin' foot.Category: Replacement Parts