Glow Moose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moose Head by MorenaP for Materio3D scaled to 100 mm wide and modified to take a NeoPixel Diffused 8mm Through-Hole…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 164
- Wydruki
- 4
- Wyświetlenia
- 1017
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Moose Head by MorenaP for Materio3D scaled to 100 mm wide and modified to take a NeoPixel Diffused 8mm Through-Hole LED. Use the clearest filament you can find and you've got a rainbow glow moose!
Licensing requirement from creator: if you create a derivative of this, please keep the logo visible somewhere.
(I had to move the Materio3D logo from under the LED void.)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
100%
Filament: Generic PLA Clear
Notes:
Use the clearest filament you can find. I found that printing solid with radial infill helped with the material I used.
Hard to believe but this model doesn't need supports!Post-Printing
Tip
Clear PLA tends to form very fine threads unless you print very slowly and manage retraction extremely carefully. Running a heat gun very quickly (a couple of seconds) over the model makes most of these go away. PLA melts quickly, so keep the heat gun moving.
Category: Sculptures