Edge Lit Acrylic Frame - 100 × 100 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple frame and stand for RGB colour-changing edge-lit display. Designed for 3 mm clear acrylic, template provided…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Simple frame and stand for RGB colour-changing edge-lit display. Designed for 3 mm clear acrylic, template provided (edge_lit-flat.dxf).
You will also need:
- a Digispark USB microcontroller board;
- a Digispark RGB Shield Kit;
- a USB power bank.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.3 mm
Infill:
10 %
Filament: Generic PLA any
Notes:
-
engrave your design onto 3 mm clear acrylic using the template provided. Best to keep the design ≥ 10 mm from the top and sides and ≥ 20 from the bottom edge. The template has a central cutout for a 5 mm LED. Don't forget to remove the acrylic protective paper!
(optional) glue thin strips of aluminium foil to the top and side edges of the acrylic sheet to improve brightness of the image. This is immensely fiddly, and may not be worth your time.
glue the mitre frame pieces to the top and sides of the acrylic sheet
slot the framed sheet into the top of the stand. The front of your image should be on the other side of the stand from the USB battery bank cutout. At your option, glue the sheet into the stand.
Program the Digispark with the DigiRGB sketch, and install the RGB Shield
Plug the Digispark into the power bank, and install it into the base. The stand was sized for the ubiquitous cheap square USB power banks - you may need to improvise if yours is different. Also, you might consider covering the base of the Digispark — I accidentally shorted one and fried its power regulator.
Category: Signs & Logos