1 / 1
Trellis mounting clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clip can be used to mount a 5mm trellis to a wall or fence.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (39)Powiązane
This clip can be used to mount a 5mm trellis to a wall or fence.
The brand I copied the design off of is Peacock.
They offer trellis' in The Netherlands, which come with only 4 mounting clips, which is too few to make the trellis sturdy.
The offset (baseplate to center of the clip point) created by this mounting clip is 24.1 mm.
I printed it in FilRight PLA Tough on an Ender 3 S1 Pro using Cura 5.1 as slicer.
Layer height was set to 0.2 mm and infill to 50%.
For longevity, it should be printed in a better material, e.g. PETG.