Pen Grip Ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric pen grip ball, inspired by Makers Making Change's pen ball and designed for them. Prints in PLA, PET-G or…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 388
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Parametric pen grip ball, inspired by Makers Making Change's pen ball and designed for them.
- Prints in PLA, PET-G or ABS withminimal supports.
- Parametric: size and pen diameter can be changed
- Uses 5× M4×12 machine screws and 5× M4 nuts
Assembly video: https://www.youtube.com/watch?v=FC61UELQ8Oo
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.3 mm
Infill:
20 %
Notes:
Use at least two shells for strength.rnrnThe design works best with some very light support material over the print bed only. It can be difficult to remove support from inside the inner nut catches, so use the lightest support you can get away with. Youcan print this without support, but the surface finish might not end up the best without support.
Category: Hand Tools